JSK Corporation Private Limited

Sika® Raintite I is a multifunctional polymer emulsion for enhancing the properties of mortar/ concrete / grout/ cement slurry providing good adhesion, water resistance and improvement of several other properties..

3-COMPONENT, HIGH PERFORMANCE, POURABLE EPOXY GROUTING SYSTEM
Sikadur®-42 IN is a three-component, high performance, high precision, low exothermic, pourable, solvent-free epoxy grouting system. For use at ambient temperatures between +10 °C to +35 °C.

• High early strength and fast curing
• Ready-to-mix, pre-batched units
• Non-shrink

Additional Information:

• Item Code: SIKA-EPOXY-42IN
• Production Capacity: 500+ Sets per Month (depends on supplier/distributor)
• Delivery Time: 3-5 days
• Packaging Details: Pre-batched unit A+B+C 15 kg x 2 sets Part A 2 kg plastic container Part B 1 kg plastic container Part C 12 kg bag

SINGLE COMPONENT, ACRYLIC BASED, FLEXIBLE, MICRO FIBRE REINFORCED WATERPROOFING
AND HEAT REFLECTIVE COATING SYSTEM.

Sika® CoolCoat is a flexible, liquid applied, single component,
uv and weather resistant, acrylic waterproofing
membrane for all types of exposed roof slabs(new
and old),terraces(sloped and flat),etc.
Sika® CoolCoat contains cross-linking polymers, special
glass micro fibers, pigments and advanced antifungal
additive that provides long lasting tough waterproofing
membrane.
The high Solar Reflective Index of the membrane
serves as a heat reflective surface and reduces heat ingress
keeping the interior of the building cooler.

Additional Information:

• Packaging Details: Sika® CoolCoat :10 kg x 1, 5kgx 2, 2kgx 2 Sika® CoolCoat Primer : 2kgx 2, 1 kg x 2

WATER DISPERSED, ACRYLIC COPOLYMER BASED CONCRETE CURING COMPOUND.

Sika® Antisol® A-4 a water dispersed acrylic copolymer based curing compound. It is ready to use and simple to apply. Sika® Antisol® A-4 will form a thin film, covering the surface of the concrete to prevent premature water loss due to evaporation. 

Sika® Antisol® A-4 is sprayed on to newly laid concrete surfaces to form a thin film barrier against premature water loss, without disturbing the normal setting action. Sika® Antisol® A-4 is suitable where subsequent surface treatment with acrylic paints and polymer modified mortar or plaster etc. are required.  

_{Sika® Antisol® A-4 provides the following beneficial properties to the concrete surfaces:}
-Reduces incidence of plastic cracking
-Reduces shrinkage
-Reduces surface dusting

Liquid intergal waterproofing and water reducing admixture for all type of concrete and mortar.

Sikacim® is recommended for use in structural concrete, particularly for the following
 Slope Roof Slabs
 Flat Roof Slabs
 Beams
 Columns
 Slabs
 Excellent for internal and external plaster of buildings etc.
 Repair and renovation

Additional Information:

• Delivery Time: 2-3 DAYS
• Packaging Details: 200kg to 20kg

Sika® CemCrete is a multifunctional acrylic polymer emulsion for enhancing the properties of cement slurry or mortar. It provides a good adhesion, water resistance and improvement of several other properties.
Sika® CemCrete is a composite waterproof coating system when used in combination with cement, glass fibre mesh, silica sand, etc.
Waterproofing of roof slab, sunken slabs, basements, water tanks, sunshades etc.
▪ Bonding agent for uses in repair and plastering
▪ Treatment for leaching and saltpetre action
▪ Multipurpose mortar admixture  

Epoxy low viscosity injection resin - normal pot life
Sikadur®-52 Injection Normal is a 2-part, epoxy, low viscosity, normal pot life, injection resin specially formulated for crack injection work by either pressure injection or gravity feed techniques.

Sikadur®-52 Injection Normal may only be used by experienced professionals.

• Crack injection resin
• Fills and seals voids and cracks in structures such as bridges, civil engineering structures, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures.
• Structural bonding
• Preventing ingress of water and infiltration of reinforcement corrosion promoting substances

CHARACTERISTICS / ADVANTAGES
▪ Injection temperature range +5 °C to +30 °C Good adhesion to concrete, masonry, stone, steel and wood substrates ▪
▪ Suitable for both, dry and damp conditions
▪ Maximum crack width 5,0 mm ▪ Good mechanical properties
▪ Two grades for different climatic conditions
▪ High mechanical and adhesive strengths
▪ Hard but not brittle
▪ Low viscosit
▪ Injectable with single component pumps .

Additional Information:

• Delivery Time: 2-3 DAYS

Sikadur®-42 is a solvent-free, 3-component, pourable grout, based on a combination of high strength epoxy resins and specially graded aggregates. After mixing, it provides a free flowing self-levelling epoxy grout.

Additional Information:

• Delivery Time: 2-3 DAYS

HEAT RESISTANT, HIGH PRECISION, NON SHRINK, EXPANDING POURING GROUT

SikaGrout®-214 TR is a ready to use, heat resistant, cement based flowable, expanding grout for grouting for special applications where high temperature or thermal gradients are expected.

▪ Blast furnace grouting
▪ Chimney grouting
▪ Flooring around furnace