JSK Corporation Private Limited

Acrylic polymer modified cementitious waterproofing coating (Formerly SikaTop® Seal-107 IN)

SikaTop®-107 Seal IN is a two part, acrylic polymer modified cementitious liquid applied waterproofing coating system. It comprises of a liquid polymer and a cement based mix incorporating special admixtures. It is applied to concrete and mortar to prevent water in-filtration.
Seal all penetrations with a suitable Sika sealant like SikaSwell® S-2 or Sikagard® 694 F(I) epoxy putty to prevent any leakage from the periphery of the down take pipes.
Additionally, if so desired cut Sika® Fabric-50 to desired dimensions for detailing on intersections and also around pipe penetration by embedding it with the SikaTop®-107 Seal IN.
Sika® SealTape F is recommended to be used as a component of a composite sealing system in conjunction with SikaCeram® tile adhesive and ceramic tiles to achieve water tightness in wet rooms and around wet areas..

Additional Information:

• Packaging Details: Part A+B pre-batched- 25 kg set Part A -5 kg container Part B- 20 kg bag

Low viscosity injection resin

Sikadur®-52 LP is a two part, solvent free, low viscosity injection liquids, based on high strength epoxy resins. Suitable for use in hot and tropical climatic conditions.

Injection resin with good adhesion to concrete, mortar, stone, steel, and wood.
▪ Used to fill and seal voids and cracks in structures such as bridges and other civil engineering, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures.
▪ Effective barrier against water infiltration and corrosion promoting media.
▪ Structurally bonds concrete sections together...

Additional Information:

• Item Code: Sikadur52LP
• Production Capacity: Large-scale industrial manufacturing (Sika standard production)
• Delivery Time: 2–7 working days, depending on stock availability & location
• Packaging Details: Supplied as pre-batched 2-component kits Leak-proof, sealed containers Each pack marked with batch number, manufacturing date & mixing ratio Secure outer packaging to prevent transit damage

SikaTop®-107 Seal IN
Acrylic polymer modified cementitious waterproofing coating (Formerly SikaTop® Seal-107 IN)


SikaTop®-107 Seal IN is a two part, acrylic polymer modified cementitious liquid applied waterproofing coating system. It comprises of a liquid polymer and a cement based mix incorporating special admixtures. It is applied to concrete and mortar to prevent water infiltration.

Waterproofing applications for various structures such as: Potable concrete water tanks, reservoirs, waste water tanks ▪
▪ Terraces, balconies, sunshades, etc.
▪ Flat and small roofs
▪ Basement and Retaining walls
▪ Swimming pools, fountains, water bodies, canals
▪ RCC gutters, drains and planter boxes
▪ Wet areas like toilets, kitchen, utility, sunk slabs ▪ Lift pits, sump, etc.
▪ Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork
▪ Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack ▪
▪ Pore / blowhole filling Sealing fine “hairline” cracks in concrete structures not subject to movement
▪ Sealing internal basement walls against dampness

Additional Information:

• Item Code: SikaTopSeal107
• Production Capacity: Bulk Supply Available (as per demand)
• Delivery Time: 2–5 Working Days
• Packaging Details: Component A (Liquid): 5 kg Component B (Powder): 20 kg Total: 25 kg per set

Sikament is a plasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non structural elements. Specially recommended for the following types of concrete:

Additional Information:

• Delivery Time: 2-3 DAYS
• Packaging Details: 250 kg / Bulk supply

LIQUID INTEGRAL WATERPROOFING CONCRETE AND MORTAR ADMIXTURE.

Liquid integral waterproofing admixture for all types of concrete and mortar.
SikaCim® is recommended for use in structural concrete, particularly for the following
▪ Slope Roof Slabs
▪ Flat Roof Slabs
▪ Beams ▪ Columns
▪ Slabs Excellent for internal and external plaster of buildings etc. 
▪ Repair and renovation  

CHARACTERISTICS / ADVANTAGES
▪Compatible with all varieties of Portland Cement including Slag Cement
▪ Minimizes loss of mortar due to rebound in plastering jobs, hence great ease of application and saving 
▪ Required at a very small dosage, hence economical
▪ Improves water tightness to a great extent Performs multiple roles of water reducer as well as waterproofer
▪ Improves workability without increased water content 
▪  Reduced shrinkage, better finish

Additional Information:

• Delivery Time: 3-5 Days

Antisol® E curing compound is sprayed on newly laid concrete surface to form a thin film barrier against premature water loss. Without disturbance to the normal setting action, the concrete is then allowed to cure and achieve maximum properties. Antisol® E is particularly useful in large areas of exposed concrete.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: 80Kg drum